Języki
angielski
biegły
niemiecki
podstawowy
Doświadczenie zawodowe
QA/QC Engineer
Participation in an audit of the contracted erection companies, where needed,Review and approval for release of required documents for erection work, welding procedure specifications, process qualification records, etc.,
Review of qualification certificates of welders scheduled to perform work; quality assessment of welder performance qualification tests and specimen qualification welds,
Checks to ensure that welding materials are used and stored according to specific procedures,
Complete or random (spot) checks of weld inspections and assessments in accordance with the contract, the applicable codes, standards and specifications and QA / QC procedures,
Checks to ensure proper storage and transport of material on site.
Review and approval for release of weld inspection documents and reports, radiographs, ultrasonic testing records etc.,
Checks of site supporting facilities, inspection of tools and materials to ensure suitability for use, safety and reliability, and that such tools and materials are available in the necessary quantities,
Checks to ensure cleanliness (in particular the interior of piping systems), and that openings are properly closed and sealed for transport purposes, arranging random checks, signing / initialing of test reports,
Review and acceptance of testing of welding documentation, check for completeness,
Participation in weekly progress meetings with suppliers, erection companies and Siemens site management,
Support work for regulatory authorities and / or third-party organizations for acceptance testing, and stipulation of special procedures within the framework of the applicable codes, standards and specifications,
Review of qualification certificates of welders scheduled to perform work; quality assessment of welder performance qualification tests and specimen qualification welds,
Checks to ensure that welding materials are used and stored according to specific procedures,
Complete or random (spot) checks of weld inspections and assessments in accordance with the contract, the applicable codes, standards and specifications and QA / QC procedures,
Checks to ensure proper storage and transport of material on site.
Review and approval for release of weld inspection documents and reports, radiographs, ultrasonic testing records etc.,
Checks of site supporting facilities, inspection of tools and materials to ensure suitability for use, safety and reliability, and that such tools and materials are available in the necessary quantities,
Checks to ensure cleanliness (in particular the interior of piping systems), and that openings are properly closed and sealed for transport purposes, arranging random checks, signing / initialing of test reports,
Review and acceptance of testing of welding documentation, check for completeness,
Participation in weekly progress meetings with suppliers, erection companies and Siemens site management,
Support work for regulatory authorities and / or third-party organizations for acceptance testing, and stipulation of special procedures within the framework of the applicable codes, standards and specifications,
Welding Engineer
Work in Finland at the construction of power plant Riikinvoima Oy in Leppävirta.
Analyzing and giving opinions about documentation regarding welding works. Developing and implementing welding technology. Supervision of welding works under scope of the project. Giving opinions about skills of welders and allocation them to appropriate tasks.
Preparation quality documentation according to the contract and standards requirements. Ordering NDT tests and analyzing results.
Representing company from QA/QC site during kick-off meeting with the client.
Analyzing and giving opinions about documentation regarding welding works. Developing and implementing welding technology. Supervision of welding works under scope of the project. Giving opinions about skills of welders and allocation them to appropriate tasks.
Preparation quality documentation according to the contract and standards requirements. Ordering NDT tests and analyzing results.
Representing company from QA/QC site during kick-off meeting with the client.
QA/QC Engineer
Senior quality inspector for Air Cooler Condensate System Unit 1 at Kusile Power Station 4800MW.
Directs and coordinates technical personnel in performing inspections to ensure workers compliance with established welding procedures, restrictions, and standards for conformance with national code requirements.
Contacts client to exchange ideas, information and offer technical advice concerning welding matters.
Review and approve ITPL, ensure that intervention points are followed by involved parties.
Reviewing work packs (SWCF), issuing daily surveillance reports, NCRs.
Validate certificate of calibration (welding equipment & inspection instrument). Check material and consumable certifications.
Directs and coordinates technical personnel in performing inspections to ensure workers compliance with established welding procedures, restrictions, and standards for conformance with national code requirements.
Contacts client to exchange ideas, information and offer technical advice concerning welding matters.
Review and approve ITPL, ensure that intervention points are followed by involved parties.
Reviewing work packs (SWCF), issuing daily surveillance reports, NCRs.
Validate certificate of calibration (welding equipment & inspection instrument). Check material and consumable certifications.
Welding Engineer/Welding Inspector
Wood Group
Dorad Project Israel, Combined Cycle 800MW Gas Power Plant. 12 OTSG Boilers, 12 GT LM6000 Gas Turbines and 2 Skoda Steam Turbines.
Supervision of subcontractors in the construction of the power plant. Control of delivered materials, supervising the pressure tests of elements. Approval quality documentations, PQR, WPS, WPQR, procedures, PWHT and NDT protocols. Final acceptance of the elements. All work according ASME codes.
Work with steels: SA 106 Gr.B, SA 335 P11, SA 335 P22, SA312 TP 304L.
Supervision of subcontractors in the construction of the power plant. Control of delivered materials, supervising the pressure tests of elements. Approval quality documentations, PQR, WPS, WPQR, procedures, PWHT and NDT protocols. Final acceptance of the elements. All work according ASME codes.
Work with steels: SA 106 Gr.B, SA 335 P11, SA 335 P22, SA312 TP 304L.
Welding Engineer
Work in Germany at the construction of boiler GKM9 910MW.
Supervision of welding process, visual control of welded seems, examination of welders, supervision of heat treatment, ordering of tests NDT and choice which welded seam have to be examined, preparing welding map in construction of pipeline(Isometry), preparation and review of Welding Procedure Specifications, contact with a client. Preparation of the quality and welding documentations in paper form and in program BIMAS.
Work with steels: 16Mo3, 13CrMo4-5, 10CrMo9-10, 7CrMoVTiB10-10, 15NiCuMoNb5-6-4, X10CrMoVNb9-1, VM12-SHC, Alloy 617, S304H sp, HR3C.
Supervision of welding process, visual control of welded seems, examination of welders, supervision of heat treatment, ordering of tests NDT and choice which welded seam have to be examined, preparing welding map in construction of pipeline(Isometry), preparation and review of Welding Procedure Specifications, contact with a client. Preparation of the quality and welding documentations in paper form and in program BIMAS.
Work with steels: 16Mo3, 13CrMo4-5, 10CrMo9-10, 7CrMoVTiB10-10, 15NiCuMoNb5-6-4, X10CrMoVNb9-1, VM12-SHC, Alloy 617, S304H sp, HR3C.
Quality Control Inspector
Power engineering, production of power-industrial boilers, biofuel steam boilers, boilers for waste incinerating plants, burners, steel constructions, ribbed and padded pipes.
Control of delivered materials, supervising assembly, welding and painting works, pipes bending, supervising the pressure tests of elements, preparation of the quality documentations, final acceptance of the elements made in the company, the organization of acceptance with the notified body, the acceptance of elements executed by subcontractors, quality supervision of subcontractors.
Control of delivered materials, supervising assembly, welding and painting works, pipes bending, supervising the pressure tests of elements, preparation of the quality documentations, final acceptance of the elements made in the company, the organization of acceptance with the notified body, the acceptance of elements executed by subcontractors, quality supervision of subcontractors.
Szkolenia i kursy
09.2013 Certyfikat Międzynarodowego Inspektora Spawalnictwa (IWI-C)
05.2013 Certyfikat badań magnetyczno-proszkowych MT2
01.2013 Uprawnienia do czytania radiogramów spoin RT2 ORS
11.2012 Certyfikat badań penetracyjnych PT 2
04.2012 Certyfikat Międzynarodowego Inżyniera Spawalnika (IWE)
09.2009 Certyfikat badań wizualnych VT 2
01.2012 - Kurs języka niemieckiego w Abendakademie Mannheim „Deutsch als Fremdsprache”
2008 Uprawnienia spawalnicze TUV - EN 287-1 141 T BW 5 S t6.0 D64 H-LO45 ss nb
2006 - 2007 Kurs języka angielskiego Metodą Callana
2006 Uprawnienia na kierowanie wózkiem jezdniowym z napędem silnikowym
2003 Prawo jazdy kat. B
05.2013 Certyfikat badań magnetyczno-proszkowych MT2
01.2013 Uprawnienia do czytania radiogramów spoin RT2 ORS
11.2012 Certyfikat badań penetracyjnych PT 2
04.2012 Certyfikat Międzynarodowego Inżyniera Spawalnika (IWE)
09.2009 Certyfikat badań wizualnych VT 2
01.2012 - Kurs języka niemieckiego w Abendakademie Mannheim „Deutsch als Fremdsprache”
2008 Uprawnienia spawalnicze TUV - EN 287-1 141 T BW 5 S t6.0 D64 H-LO45 ss nb
2006 - 2007 Kurs języka angielskiego Metodą Callana
2006 Uprawnienia na kierowanie wózkiem jezdniowym z napędem silnikowym
2003 Prawo jazdy kat. B
Edukacja
Specjalizacje
Inżynieria
Monterzy/Serwisanci